Inground uplight luminaires |
High intensity discharge lamps
Compact fluorescent lamps
Halogen lamps |
IP 68 Dusttight and Pressure Watertight conforming to DIN, VDE, IEC. |
Class I. |
This inground uplight with
asymmetrical light distribution is
designed for high intensity discharge lamps and halogen lamps for flush mouting in reinforced surfaces,
pathways and squares.
The asymmetrical reflector is made of anodized high purity aluminium,
chemically brightened. The thermal shock resistant safety stepped glass lens 12 mm in thickness sealed with weatherproof and durable moulded silicone rubber gasket can withstand a maximum load of 1500 kgs at the speed of vehicles with pneumatic tyres driving over the luminaires not exceeding 50 km/h. Drainage must be provided for in the course of preparation of the
foundation. The distance between the luminaires and the illuminated objects must be at least 0.5 m.
The temperatures (T) attained on the tempered glass lens during the
operation must be observed. For safety reasons, when the luminaires is installed in the wet conditions, we recommend using the special skidding-block glass lens (DIN 51130) for public areas used by pedestrains. For board spread light distribution, the skidding-block glass lens must be used. |
- Corrosion resistant die cast stainless
steel housing in 316 grade |