Inground uplight luminaires |
High intensity discharge lamps |
IP 67 Dusttight and Watertight
Conforming to DIN ,VDE,IEC. |
Class I. |
This inground uplight with
asymmetrical light distribution is
designed for high intensity discharge
lamp for flush mouting in reinforced
surfaces, pathways and squares.
The asymmetrical reflector is made of
anodized high purity aluminium,
chemically brightened. The themal
shock resistant safety stepped glass
lens 10 mm in thickness sealed with
weatherproof and durable moulded
silicone rubber gasket can withstand a
maximum load of 1500 kgs at the speed
of vehicles with pneumatic tyres driving
over the luminaires not exceeding 50
km/h. Drainage must be provided for in
the course of preparation of the
foundation. The distance between the
luminaires and the illuminated objects
must be at least 0.5 m.
The temperatures (T) attained on the
Tempered glass lens during the
operation must be observed. For safety
reasons, when the luminaires is
installed in the wet conditions, we
recommend using the special skidding-block glass lens (DIN 51130) for public
areas used by pedestrians. For board
spread light distribution , the skidding–block glass lens must be used. |
- Corrosion resistant die cast aluminium alloy housing |